Selecting Files in All Folder Mode
2 1
76
3, 7, 1, 6, 2
!, ", #, $,
ENTER
In All Folder mode, you don’t have to navigate the folder hierarchy because all folders that contain files appear at the same level. This mode can only be used while playback is stopped.
1While playback is stopped, press !or 3(front panel: press and hold 2).
The compact disc player enters All Folder mode, and
2Use #/$or 7/6to select the other folders. You can select any folder that contains files.
En
3Press "(front panel: 1).
The first file name inside the folder appears.
Use #/$or 7/6to select the files within the folder.
To select another folder, press 3again (front panel: 2), and then use 7/6to select it.
4Press ENTER or 1to start playback.
Playback will start with the specified file or folder and continue until all of the file on the disc have been played.
To cancel the procedure at any point, press 2.
■To Select Folders and Files by Number
1.Use the number buttons as shown in the examples below to enter folder/file numbers.
To select: | Press: |
Folder/File #8
Folder/File #10
Folder/File #34
Used to enter numbers over 10.
2.Playback starts. When you enter folder number, playback will start from the first file in the selected folder. If a folder contains more than 99 files, single- and
Note
•The behavior of 2on the compact disc player can be set from “STOP KEY” (➔ 32).
Setting the Display Brightness
DIMMER 
You can adjust the brightness of the compact disc player’s display.
1Press DIMMER repeatedly to change the brightness of the display in sequence.
Normal → Dim → Off
Normal
Dim
Off
The Display Off LED lights.
Note
•The display lights for a 5 seconds if you control any buttons on the front panel or remote controller when the display brightness is set to OFF.
24
