Onkyo CR-305FX instruction manual Receiving stations, Tuning the radio, Using Auto Memory FM only

Receiving stations

	TUNING/PRESET
		TUNING/PRESET
		U
STANDBY/ON MEMORY FM MODE		VOL ME
	DISPLAY	INPUT
		E
		C
		N

CLEAR	E
	S
	E
	R
	P
	C
	TI
	US
	O
PHONES	AC
MIN	MAX

MEMORY INPUT

1

Remote controller

INPUT

INPUT

2

TUNING/PRESET

MEMORY FM MODE

AUTO

MEMORY

CLEAR

STANDBY/ON CLOCK

CALL

2 3

1

5	6	INPUT	INPUT
4
8	9	A.PRESENCE
7

+10 CLEAR

0MUTING

MEM RANDOM

SLEEP REPEAT

CD

TUNER

TIMER

PRESET

TAPE

ENTER

Tuning the radio

1.Select FM or AM using the INPUT buttons or the IN-

PUT buttons on the remote controller.

2.Press and hold the TUNING/PRESET buttons for about 0.5 seconds to change the frequency.

The indoor antenna should be installed on a wall or other surface in the position which gives the best reception. For more informa- tion on how to install the antenna, refer to pages 10 and 11.

To fine-tune the frequency, use the TUNING/PRESET but- tons while the frequency is flashing.

Using Auto Memory (FM only)

This function enables you to store the frequencies into memory au- tomatically, without having to go through and store each frequency manually.

In FM mode, hold down the MEMORY button for a few seconds. The MEMORY indicator lights up on the display and “AUTO” will start flashing on the display. Keep holding down the button for a few more seconds to start the Auto Memory function.

The frequencies are scanned from low to high. Up to 30 FM stations with the best signal quality are selected, sorted in order from low to high frequency, and stored into the preset memory.

Note

•All stations previously stored in memory will be replaced with new Auto Memory stations.

22