Onkyo CR-425UKD, CR-325UKD Basic Operations, Turning On the CD receiver, Adjusting the Volume

Basic Operations

STANDBY indicator

STANDBY/ONVOLUME

PHONES INPUT

Turning On the CD receiver

CD receiver	Remote
	controller

To turn on the CD receiver, press the [STANDBY/ON] button on the CD receiver or remote controller. The STANDBY indicator goes off.

Press the [STANDBY/ON] button again to set the CD receiver to Standby. The STANDBY indicator lights up.

Tip:

When you start playback on (or turn on) an Onkyo RI Dock, MD recorder, or cassette deck that’s connected to the CD receiver with an ucable and analog audio cable, the CD receiver turns on automatically. Similarly, when you set the CD receiver to On or Standby, the other component will also be set to On or Standby.

Adjusting the Volume

CD receiver	Remote
	controller

Turn the [VOLUME] control clockwise to increase the volume or counterclockwise to decrease it.

You can also use remote controller’s VOLUME [q]/[w] buttons.

STANDBY/ON

INPUT

/

VOLUME

/

Selecting the Input Source

You can select CD, DAB, AM, FM, or a connected com- ponent (TAPE, DOCK, USB) as the input source.

To select the input source, press the remote controller’s INPUT [t]/[1] buttons repeatedly. On the CD receiver, press the [INPUT] button repeatedly. The input sources are selected in the following order.

• CR-525UKD

CD DAB FM AM

DOCK USB TAPE *1

• CR-425UKD/CR-325UKD

CD DAB FM AM

DOCK TAPE*1

*1 Input Display can be changed (see page 27).

Using Headphones

Turn down the volume, then connect your stereo head- phones to the PHONES minijack.

You can adjust the volume and mute the sound, as explained earlier.

The speakers output no sound while the headphones are connected.

PHONES jack

25