Onkyo CR-525UKD, CR-325UKD, CR-425UKD Selecting DAB Stations, Displaying DAB Radio Information

Listening to the Radio—Continued

DISPLAY

/ (TUN/ TUN )

Selecting DAB Stations

Use the Rewind and Fast For- ward [5]/[4] buttons to select the DAB stations.

If a secondary service is available, a right angle bracket (>) is displayed. Press the Fast Forward [4] button to listen to the secondary service.

While the secondary service is selected, a left angle bracket (<) is displayed. Press the Rewind [5] button to return to the primary service.

When you select a station that you’ve selected a lot in the past, the letter F (short for Favorite) is displayed.

“F”

If you select a station that cannot be received properly, a question mark (?) is displayed.

“?”

•You can also use the CD receiver’s PRESET [t]/[1] button to select the DAB stations.

The operation of the PRESET [t]/[1] buttons can be changed.

Press and hold the Stop [2] button for 3 seconds until “Preset Mode” or “Station Mode” appears on the display.

Station Mode: Select DAB station (default).

Preset Mode: Select Preset (see page 48).

Displaying DAB Radio Information

Press the remote controller’s [DISPLAY] button repeat- edly to display more information about the selected DAB station.

You can also use the CD receiver’s [DISPLAY] button to display this information.

1DLS (Dynamic Label Segment)

When tuned to a station that’s broadcasting DLS text data, the text will scroll across the display.

(Scroll)

2Program Type

Displays the type of program.

3Bit Rate and Audio Mode

Displays the station’s bit rate and audio mode (ste- reo, mono, or joint stereo).

4Signal Quality

Displays the signal quality. 0–59: Poor reception 60–79: Good reception 80–100: Excellent reception

5Multiplex Name

Displays the name of the current multiplex.

6Multiplex Number and Frequency

Displays the number and frequency of the current multiplex.

44