Onkyo DV-C501 instruction manual Audio Playback Settings, Selecting Sound Channels of Video CDs

DVD Video Disc Functions (continued)

123

Good morning! Bon jour! ¡Buenos días!

4 5 6

789

+100

REMOTE CONTROLLER RC-417DV

Your DV-C501 allows you to select the following audio-related settings. The number of options depends on the DVD video disc you are playing back. It is not possible to select an option for which there is no data on the DVD.

///

AUDIO

CLEAR

Audio Playback Settings

Language: A DVD video disc may contain several language versions of a movie. Select the preferred language.

Recording system: Select the recording system that best matches the input capabilities of your amplifier or receiver. For example, there is little point in selecting “ 6CH” if your amplifier does not support Dolby Digital 5.1. Depending on the selected recording system, the DV-C501 automatically converts the audio data to an acceptable format for your amplifier.

The DV-C501 accepts the Dolby Digital, DTS, and PCM recording systems. Other systems cannot be played back. See also the conversion table below for details about the available options. Dolby Digital 5.1 Channel is displayed as “ 6CH.”

1	AUDIO	Press the AUDIO button during play-
		back of a DVD video disc.
		The current Audio settings are displayed
		for about 3 seconds.
			Position number
				Language
					Recording system
						Audio channel
			Audio: 1 ENG PCM 2CH
			Audio Out Select : Bitstream
						sound format
					Output
		See page 39 for a list of abbreviations of
		the available languages and their mean-
		ing.
2	AUDIO	Press the AUDIO or button while the
		above Audio page is still displayed (i.e.
		within 3 seconds).
		Pressing one of these buttons cycles
		through the available options.

Audio:1 ENG PCM 2CH

ENTER

Audio:2 FRE 6CH

Audio:3 SPA PCM 2CH

Use the button to cycle in the opposite direction.

3 CLEAR	After making the desired settings,
	either wait more than 3 seconds, or
	press the CLEAR button to leave the
	Audio page.

Selecting Sound Channels of Video CDs

A Video CD may have left and right sound channels with different information (sound track on one channel, dialogues on the other; or one language on one channel, and another on the second channel, etc.). You can select the desired channel:

During playback, press AUDIO repeatedly to select the sound channel.

AUDIO	L. R	Both the left and right channel
		are heard.
	L	The left channel is heard.

RThe right channel is heard.

28