Onkyo DV-CP701 Basic Playback, Notes, The disc tray turns counterclockwise two, bays at a time

Basic Playback

DISC	OPEN/
DISC SKIP SELECT	CLOSE
		ON STANDBY		OPEN/
				CLOSE
		SEARCH	LAST M	MEMORY CHAIN MODE
				REPEAT
		1	2	3
				A-B
		4	5	6
				RANDOM
		7	8	9
				DISPLAY
		+10	0	CLEAR
		TOP MENU		MENU
			ENTER
		RETURN		SETUP
		AUDIO	ANGLE SUBTITLE
PLAY/ENTER
		DISC 1	DISC 2	DISC 3 STEP/SLOW
	DISC1–6	DISC 4	DISC 5	DISC 6

DISC SKIP PROGRESSIVE DIMMER

DISC SKIP

RC-521DV

Loading & Removing Discs

DVD VCD CD MP3 WMA JPEG

This section explains how to load and remove discs.

1	Press the OPEN/CLOSE [ ]
	button.
	The disc tray opens and the six disc num-
Remote controller	ber indicators appear on the display. A cir-
	cle appears around the number of the disc
OPEN/
	bay on the right.
CLOSE

Notes:

•You can load up to six discs. You don’t have to load all six discs every time.

•When the disc tray is closed, all of the disc indicators appear until the DV-CP701 has checked each bay for the presence of a disc. If a bay is found to have no disc, the corresponding indicator disappears.

•The disc tray can be opened and closed even while the DV- CP701 is in Standby mode, so you don’t have to turn it on to load or remove your discs. (The disc tray may take sev- eral seconds to open.)

•The DV-CP701 supports 8 cm and 12 cm discs. To avoid damaging your discs or DV-CP701, always place discs in the center of the disc bays.

•Only load discs that are supported by the DV-CP701 (see page 7). Don’t load cartridge-type discs.

•To avoid personal injury, keep your hands away from the disc tray as it closes.

•Always use the OPEN/CLOSE [ ] button to open and close the disc tray. Never push the disc tray, and don’t touch it, or obstruct it while it’s opening or closing. Don’t press down on the disc tray while it’s open, and don’t load anything other than supported discs. Doing so may damage your discs or DV-CP701.

Loading Discs During Playback

DVD VCD CD MP3 WMA JPEG

This section explains how to load and remove discs without stopping playback.

2	Place a disc, label side up, into
	each bay.
3	Press the [DISC SKIP] button to
	access the other disc bays.
	The disc tray turns counterclockwise two
Remote controller	bays at a time.
DISC SKIP

1

Remote controller

OPEN/

CLOSE

Press the OPEN/CLOSE [ ] button.

The disc tray opens.

The disc that’s currently playing remains inside the DV-CP701 and its disc bay is empty and won’t come to the front. To remove this disc you must stop playback before pressing the OPEN/CLOSE [ ] button.

4

When you’ve finished, press the OPEN/CLOSE [ ] button again.

The disc tray closes.

See page 22 for information on selecting and playing discs.

Remote controller

OPEN/

CLOSE

Tip: If you press the Play [ ] button, the disc tray will close and playback of the disc in the right bay will start automati- cally. If there is no disc in that bay, the DV-CP701 will check the other bays and play the first disc it finds.

Tip: If you press one of the DISC SELECT 1–6 buttons, the disc tray will close and playback of the selected disc will start automatically.

2	Load or remove discs as required,
	and press the [DISC SKIP] button
	to access the other disc bays.
Remote controller	The disc numbers appear onscreen. The
DISC SKIP	number of the disc bay on the right is
	highlighted.

3

Remote controller

OPEN/

CLOSE

When you’ve finished, press the OPEN/CLOSE [ ] button again.

The disc tray closes.

Playback of the current disc continues uninterrupted until you either stop play- back or select another disc.

Tip: If you press one of the DISC SELECT 1–6 buttons, the disc tray will close, playback of the current disc will stop, and playback of the newly selected disc will start automatically.

21