Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.
For connection to your TV, see pages 12 and 13.
Select the connection type depending on your audio equipment.
When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly. When not using the jack, keep it capped to protect it from dust intrusion.
Connecting to an Amplifier Equipped With a Dolby Digital Decoder
| ANALOG | DIGITAL | REMOTE |
| OUTPUT | OUTPUT | |
|
|
| CONTROL |
VIDEO OUT | L | COAXIAL OPTICAL |
|
| R |
|
|
Y CB CR S VIDEO | VIDEO |
|
|
| 75 Ω |
|
|
| coaxial |
| |
Signal flow | cable |
|
|
Optical digital cable
Connection | To COAXIAL type | To OPTICAL type digital audio |
example | digital audio input | input |
|
|
Amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full
Front speaker (left)
Center speaker
Rear speaker (left surround)
| Front |
TV | speaker |
(right) |
Sub woofer
Rear speaker
(right surround)
•Use DVD video discs encoded via the Dolby Digital recording system.
•Make the following setting
Setting | Select: | Page |
Audio Out Select | Bitstream | 38 |
Recording system | j | 29 |
Connecting to an Amplifier Equipped With a Dolby Pro Logic Surround
|
|
| ANALOG | DIGITAL | REMOTE |
|
|
| OUTPUT | OUTPUT | |
|
|
|
|
| CONTROL |
|
| VIDEO OUT | L | COAXIAL OPTICAL |
|
|
|
| R |
|
|
Signal flow |
| Y CB CR S VIDEO | VIDEO |
|
|
|
|
|
|
| |
|
|
|
| Audio cable | |
Connection | To audio input |
|
|
| |
|
|
|
| ||
example |
|
|
| Amplifier equipped with | |
|
|
|
| ||
|
|
|
| Dolby Pro Logic surround | |
| Front |
|
|
| Front |
| speaker |
|
| speaker | |
| (left) |
| TV |
| (right) |
Center speaker
Rear speaker
Connect one or two rear speakers.
The output sound from the rear speakers will be monaural even if you connect two rear speakers.
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and
speaker system (right and left front speakers, a center speaker, and one or two rear speakers).
•With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in “Connecting to an Amplifier equipped with a Dolby Digital Decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Pro Logic Surround sound.
•With an amplifier not equipped with Dolby Digital Connect the equipment as follows.
•Make the following setting
Setting | Select: | Page |
Audio Out Select | Analog 2ch | 38 |
|
|
|
Note:
∙Be sure to set "Audio Out Select" to "Analog 2ch" when you enjoy sounds of Dolby Pro Logic Surround using this connection.
14
