10
Control Position and Names
For operational instructions, see th e page indicated in brackets [ ].
1POWER button [17]
Turns on the main power supply.
2STANDBY/ON button [17]
Toggle for standby and on.
3STANDBY indicator [17]
Lights in the standby mode.
4Disc tray [18]
5OPEN/CLOSE 0 button [18]
Press to open or close the disc tray.
6STOP 7 button [18]
Stops playing a disc. When disc is playing, if you press STOP
7 and PLAY £, the disc will start resume play. When STOP
7 is pressed again during stop mode, the resume function is
canceled.
7PLAY/PAUSE £/8 button [18]
Begins to play disc (close disc tray f irst if it is open).
Temporarily stops playback when a disc is playing. Press this
button again for normal playback.
8Remote Control sensor [9]
9Display [11]
0SKIP 4/¢ buttons [19, 21]
Allow you to move to the previous chapter or track / the next
chapter or track on a disc.
-SEARCH 1/¡ buttons [19, 21]
Allow you to search through a disc while it is in play mode.
The search speed changes each time you press this button.
For operational instructions, see th e page indicated in brackets [ ].
1DIGITAL OUTPUT OPTICAL jack [16]
Use optical cable to connect your DVD Player to an AV com-
ponent that features digital input capability. If the component
has a Dolby Digital or DTS decoder, you can enjoy theater-
quality multichannel sound.
2DIGITAL OUTPUT COAXIAL jack [16]
Use coaxial cable to connect your DVD Player to an AV com-
ponent that features digital input capability. If the component
has a Dolby Digital or DTS decoder, you can enjoy theater-
quality multichannel sound.
3ANALOG OUTPUT jacks [13-16]
Insert audio cables (left and rights) to these jacks on your DVD
Player and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.
4VIDEO OUTPUT VIDEO jack [13]
Connect a video cable to this jack and to the Video Input jack
on your TV.
5VIDEO OUTPUT S VIDEO jack [14]
If your TV has a S-Video jack, you can connect an S-Video
cable to your TV and to your DVD Player for improved video
quality. The S-Video cable only carries the video signal;
remember to connect the left and right audio cables.
6VIDEO OUTPUT COMPONENT (PR/PB/Y) jacks [15]
If your TV has component inputs, you can connect a compo-
nent video cable to your TV and to your DV D Player for ideal
video quality. The component video cable only carries the
video signal; remember to connect the left and right audio
cables. If you connect a TV that is compatible with a Progres-
sive scan signal, you can enjoy both Interlaced and Progressiv e
scan.
Note
Progressive scan only works with NTSC format discs.
7z jacks [16]
Connect z jacks (Remote Interactive) cable to this jack and
to another Onkyo AV component for synchronized control.
Note
You must make an analog RCA/phono connection, even if you
connect digitally.

Front Panel

12 3 4 5 6 7

809-

Rear Panel

MODEL NO. DV-SP301
DVD PLAYER
L
R
OPTICAL
DIGITAL ANALOG
COAXIAL
AUDIO OUTPUT
VIDEO OUTPUT
Y
P
B
P
R
COMPONENT
VIDEO
S VIDEO
REMOTE
CONTROL

123 456 7

00_DV-SP301.book Page 10 Friday, April 18, 2003 4:18 PM