Onkyo Turning On the DX-7555, Playing CDs, Make sure the switch is set to ON, the tray, indica

Turning On the

DX-7555

Turning On the DX-7555

POWER

STANDBY indicator

To wall outlet

ON

STANDBY

1	Plug the power cord into a suit-
	able wall outlet.
2	Press the DX-7555’s [POWER]
	switch.
	Make sure the switch is set to ON	.

Playing CDs

Playing CDs

1	To open the disc tray, press the
	Open/Close [	] button.

2	Put the CD on the		Label side
	tray with the
	label-side facing
	up.
	Be sure to put 8-cm
	discs in the center of
	the tray.
3	To close the tray, press the Open/
	Close [	] button again.

3

Remote

controller

ON

To put the DX-7555 on standby, press the STANDBY button on the remote controller while the DX-7555 is powered on.

You will see the STANDBY indicator light up.

To turn on the DX-7555 from its standby mode, press the ON but- ton on the remote controller.

4	Press the Play [ ] button to
	start playback.
	Playback starts and the Play	indica-

tor appears on the display.

Note:

With CDs that contain many tracks, playback may take a while to start.

4	Press again the switch to turn off
	the DX-7555.
	Make sure the switch is set to OFF	.

After power is supplied by turning on the switch:

If you turn off the POWER switch while power is sup- plied, the DX-7555 will be powered next time you turn on the POWER switch.

If you turn off the POWER switch during Standby mode, the DX-7555 will be put on standby next time you turn on the POWER switch.

12