Advanced
Speaker Configuration settings only need to be changed if you’re not using the speakers in this package.
These settings cannot be changed while head- phones are connected, speaker set B is on, or the multichannel DVD input is being used.
Speaker Configuration
These settings are used to specify which speakers are connected.
1 | Press the [RECEIVER] button fol- |
| |
RECEIVER | lowed by the [SETUP] button. |
| SETUP |
2 | Use the Up and Down [ ]/[ ] |
buttons to select “2. SP Config,” and then press the [ENTER] but- ton.
3 | While the Subwoofer setting is | |
| ||
| selected, use the Left and Right | |
| [ ]/[ ] buttons to select Yes or | |
| No. |
|
| Yes: Select if a subwoofer is con- | |
| nected. |
|
| No: Select if no subwoofer is con- | |
| nected. |
|
4 | Use the Down [ | ] button to |
| select “Center,” and then use the | |
| Left and Right [ | ]/[ ] buttons to |
| select Yes or No. |
Yes: Select if the center speaker is connected.
No: Select if no center speaker is connected.
5 | Use the Down [ | ] button to | |
| select “Surround,” and then use | ||
| the Left and Right [ | ]/[ ] but- | |
| tons to select Yes or No. | ||
| Yes: Select if the surround speak- | ||
| ers are connected. | ||
| No: Select if no surround speakers | ||
| are connected. |
| |
6 | Use the Down [ | ] button to | |
| select “Surr Back,” and use the | ||
| Left and Right [ | ]/[ | ] buttons to |
| select Yes or No. |
| |
| Yes: Select if the surround back | ||
| speakers are connected. | ||
| No: Select if no surround back | ||
| speakers are connected. | ||
7 | Use the Down [ | ] button to | |
| select “SurrBack ch,” and use the | ||
| Left and Right [ | ]/[ | ] buttons to |
| select 2ch or 1ch. |
|
2ch: Select if two (left and right) surround back speakers are connected.
1ch: Select if one surround back
speaker is connected.
Note:
•If the Surround and Surr Back set- tings in steps 5 and 6 are set to No, this setting does not appear.
8 | Press the [SETUP] button. |
| |
| Setup closes. |
| SETUP |
55