Onkyo HTC-V10X, ST-V10X Connecting your amp, Connecting the PR-155X, Connections—Continued

Incomplete connection

Insert all the way in

DV-S155X-En.book Page 17 Saturday, July 24, 2004 2:20 PM

Connections—Continued

Connecting your amp

•Refer to the Instruction Manual of your amp as well as the instructions given here.

•Before you make connections, turn off the power of all the equipment you’re going to con- nect, and disconnect all power cords from electrical outlets. Don’t plug in the DV-S155X’s power cord yet.

• When making connections, make sure that the plug is inserted all the way into the jack.

Note

Since the DV-S155X contains components that are vulnerable to heat, don’t place it on top of an amp or other source of heat. Doing so can cause malfunctions.

1Connect an amp that supports Dolby Digital or DTS, such as the PR-155X

This allows you to enjoy Dolby Digital or DTS audio.

2Connect the audio inputs of your television

■Connecting the PR-155X

Use an optical cable to connect the DV-S155X’s AUDIO OUTPUT DIGITAL OPTICAL jack to the optical digital input jack of your amp.

Use the included audio connection cable to connect the DV-S155X’s AUDIO OUTPUT ANA- LOG jacks to the audio input jacks of your amp.

Tip

You can enjoy 5.1 ch playback with DVD video simply by connecting the digital jack. However you will need to make the analog connections as well if you want to perform analog recording from the DV-S155X onto an MD recorder or other device connected to the amp, or in order to enable system operation with an Onkyo-manufactured amp.

DV-S155X PR-155X

DVD PLAYER

DV-S155X

AV CONTROLLER

AAC	PCM	DIGITAL DTS	PL	DSP STEREO(GRN )		MASTER VOLUME
				MULTI IN(RED)
STANDBY
STANDBY / ON	SW LVL CTRL MEMORY		TIMER	INPUT	MULTI JOG
PHONES		CLEAR				SURROUND

PUSH TO ENTER

PR-155X

DIGITAL	DVD/CD
OPTICAL IN	L
Optical cable (included)	R
Audio connection cable (included)

17