HTP-520_En.fm Page 6 Tuesday, February 10, 2004 11:04 AM

Power Cord

Precautions

Before connecting the power cord, connect all of your speakers and AV components.

Turning on the SKW-520 may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the SKW-520 into a different branch circuit.

Adjustment

Setting the Subwoofer Level

To set the level of the subwoofer, use the OUTPUT LEVEL control. Set it so that bass sounds are evenly bal- anced with the treble sounds from the other speakers. Because our ears are less sensitive to very low bass sounds, there’s a temptation to set the level of the sub- woofer too high. As a rule of thumb, set the subwoofer level to what you think is the optimal level, and then back it off slightly.

MIN MAX

OUTPUT LEVEL

Operating Precautions

Placement

The speaker cabinets are made out of wood and are therefore sensitive to extreme temperatures and humidity, do not put them in locations subject to direct sunlight or in humid places, such as near an air condi- tioner, humidifier, bathroom, or kitchen.

Do not put water or other liquids close to the speakers. If liquid is spilled over the speakers, the drive units may be damaged.

Speakers should only be placed on sturdy, flat surfaces that are free from vibration. Putting them on uneven or unstable surfaces, where they may fall and cause dam- age, will affect the sound quality.

Subwoofer is designed to be used in the upright verti- cal position only. Do not use it in the horizontal or tilted position.

If the unit is used near a turntable or CD player, howl- ing or slipping of sound may occur. To prevent this, move the unit away from the turntable or CD player otherwise lower the unit’s output level.

Using Close to a TV or Computer

TVs and computer monitors are magnetically sensitive devices and as such are likely to suffer discoloration or picture distortion when conventional speakers are placed nearby. To prevent this, the SKF-520F and SKC-520C feature internal magnetic shielding. In some situations, however, discoloration may still be an issue, in which case you should turn off your TV or monitor, wait 15 to 30 minutes, and then turn it back on again. This normally activates the degaussing function, which neutralizes the magnetic field, thereby removing any discoloration effects. If discoloration problems persist, try moving the speakers away from your TV or monitor. Note that discol- oration can also be caused by a magnet or demagnetizing tool that’s too close to your TV or monitor.

Input Signal Warning

The speakers can handle the specified input power when used for normal music reproduction. If any of the follow- ing signals are fed to them, even if the input power is within the specified rating, excessive current may flow in the speaker coils, causing burning or wire breakage:

1.Interstation noise from an untuned FM radio.

2.Sound from fast-forwarding a cassette tape.

3.High-pitched sounds generated by an oscillator, elec- tronic musical instrument, and so on.

4.Amplifier oscillation.

5.Special test tones from audio test CDs and so on.

6.Thumps and clicks caused by connecting or discon- necting audio cables (Always turn off your amplifier before connecting or disconnecting cables.)

7.Microphone feedback.

6

Page 6
Image 6
Onkyo SKM-520S, SKW-520, SKS-HT520 Power Cord Precautions, Adjustment, Operating Precautions, Setting the Subwoofer Level

SKB-520, SKS-HT520, HTP-520, SKM-520S, SKC-520C specifications

The Onkyo SKW-520, SKF-520F, SKC-520C, SKM-520S, and HTP-520 form a cohesive home theater system that is designed to deliver an immersive auditory experience. This lineup emphasizes clarity, power, and a wide range of sound that ensures movies and music alike can be enjoyed in superior quality.

The SKW-520 is a subwoofer that stands out in the lineup with its impressive 12-inch cone driver. This powerful driver is capable of delivering rich, deep bass, enhancing the low-frequency effects in movies and music. The subwoofer is equipped with a built-in high-efficiency amplifier that boasts a substantial output, providing a dynamic audio experience. The adjustable crossover frequency allows users to blend the subwoofer seamlessly with the other speakers in the system.

The SKF-520F speakers are floor-standing models that are designed for both style and performance. They incorporate dual 5-inch woofers and a 1-inch tweeter, offering a balanced sound with a robust midrange and crisp highs. The tall design allows for greater sound dispersion throughout the room, creating an enveloping audio environment. The speakers are equipped with Onkyo’s Wide Range Tweeter technology, which ensures detailed high-frequency response, providing clarity even at lower volumes.

The SKC-520C center channel speaker is vital for dialogue clarity, particularly during dialog-heavy scenes. Its design features dual 5-inch woofers and a 1-inch tweeter, contributing to a clear and accurate vocal reproduction. This speaker is engineered to handle the nuances of speech, ensuring that dialogue remains intelligible amidst background sounds.

The SKM-520S surround speakers complete the system, enhancing the rear audio landscape. These compact bookshelf speakers are equipped with 5-inch woofers and 1-inch tweeters, providing an immersive surround sound experience. Their design allows for versatile placement, whether mounted on walls or positioned on shelves, making them adaptable to various room configurations.

Together, the Onkyo HTP-520 system wraps all these features in a sophisticated package that caters to enthusiasts looking for an enhanced home theater experience. With a combination of advanced acoustical engineering and high-performance components, this lineup ensures that users can enjoy their favorite content with stunning clarity and depth. The entire system works in harmony to create a comprehensive audio experience that is perfect for movies, music, and gaming alike, making it a standout choice for home entertainment systems.