Note
•Enter the appropriate remote control code before using the AV receiver’s remote controller for the first time (➔ 41).
•Connect the RI Dock to the AV receiver with an ucable (➔ 37).
•Set the RI Dock’s RI MODE switch to “HDD” or “HDD/ DOCK”.
•Set the AV receiver’s Input Display to “DOCK” (➔ 20).
■System Function
System On
When you turn on the AV receiver, the
Auto Power On
If you press the remote controller’s 1while the AV receiver is on Standby, the AV receiver will automatically turn on, select your iPod as the input source, and your iPod will start playback.
Direct Change
If you start iPod playback while listening to another input source, the AV receiver will automatically switch to the input to which the
Other Remote Controllers
You can use the remote controller that came with the AV receiver to control other iPod functions. The available functionality depends on the AV receiver.
iPod Alarm
If you use the Alarm function on your iPod to start play- back, the AV receiver will turn on at the specified time and select your iPod as the input source automatically.
Note
•Linked operations do not work with video playback or when the alarm is set to play a sound.
•If you use your iPod with any other accessories, iPod playback detection may not work.
•This function only works when the Standard mode is set to On.
■Operating Notes
•Use the AV receiver’s volume control to adjust the playback volume.
•While your iPod is inserted in the
•If you do adjust the volume control on your iPod while it’s inserted in the
Note
•On the 5th generation iPod and iPod nano, the click wheel is disabled during playback. For
Controlling Your iPod
By pressing REMOTE MODE that’s been programmed with the remote control code for your Dock, you can con- trol your iPod in the Dock with the following buttons. See (➔ 41) for details on entering a remote control code. See to the Dock’s instruction manual for more informa- tion.
■UP-A1 Dock
PORT is preprogrammed with the remote control code for controlling a Dock with Universal Port connector.
You can control your iPod when “PORT” is selected as the input source.
Without the RI Control
You must enter a remote control code 82990 first (➔ 41).
■ND-S1
• Set the
■RI Dock
•Set the RI Dock’s RI MODE switch to “HDD” or “HDD/DOCK”.
•ON/STANDBY may not work with a remote control code (without u). In this case, make an uconnection and enter a remote control code 82351 (with u).
With the RI Control
In this case, make an uconnection and enter a remote control code 82351 (with u).
• Set the AV receiver’s Input Display to “DOCK” (➔ 20).
En
39