Receiving stations
MEMORY
BAND AUTO/MONO ÃPRESET¨
FM STEREO / AM TUNER
PRESET
BAND TIMER MEMORY CLEAR
AUTO / MONO
STANDBY/ ON
TUNING
TUNING¹
DISPLAY CHARACTER
Listening to a stereo radio station
When you tune in a stereo FM station, the STEREO indicator lights up if the signal is sufficiently strong. If the signal is weak, you can still listen to the station in mono mode. In this case, tune in as follows.
1 Press the AUTO/MONO button.
The MONO indicator lights up.
Selecting preset stations
Follow the procedure below to select a preset station stored in memory.
1 Select FM or AM using the BAND button. (only for U.S. and Canadian models) BAND
CLEAR
AUTO / MONO
Displayed
Use the PRESET Ã or ¨ button to select the desired preset station.
PRESET
MONO
MHz
Clearing preset stations
You can clear preset stations from the preset memory.
2 Select the station you would like to listen to using the TUNING or ¹ button.
TUNING
18
1 Select the station as explained in the previous section.
2 Press and hold the MEMORY button and press the AUTO/MONO button within a second.
“..... ..... ” appears on the display.
MEMORY CLEAR
AUTO / MONO
Note
If you fail to press the AUTO/MONO button while holding down the MEMORY button immediately, the AUTO MEMORY function will start operating.