1Connecting the amplifier
Connect the tuner’s OUTPUT jacks and the amplifier’s TUNER input jacks using the audio connection cable. Refer to the amplifier’s instruction manual for connection information.
2AC outlet (UNSWITCHED) |
The AC power cord of another |
component can be connected to this AC |
MODEL NO.
OUTLET connector. |
This means that if the |
into an AC outlet, AC power is available |
to this AC OUTLET even if the |
off. |
FM STEREO TUNER
FM
ANTENNA 75
OUTPUT REMOTE
CONTROL
AC OUTLET
AC230V 50Hz
UNSWITCHED 100W MAX.
The shape and capacity of the AC outlet |
may differ depending on the area of |
purchase. Make sure that the capacity of |
other components connected to this unit |
does not exceed the capacity that is |
printed on the rear panel. |
230 V, 50 Hz models | 120 V, 60 Hz models |
Capacity is | Capacity is |
100 watts. | 120 watts. |
Connecting the 
connector
If you are using other ONKYO components equipped with 
connectors, you can control these components using the amplifier‘s remote controller.
Before connecting
•The amplifier must be connected to the 
system hookups for 
control operations.
•Each component has two 
connectors. There is no difference between these connectors.
•The components may be connected in any order.
•Remote control operation is not possible if only the 
remote control cable is connected to the
connectors. Connect the audio connection cables correctly.
The illustration is an example of an 
hookup. With these hookups, you can use the Program Timer function. (See “Using the timer” on page 23).
For the Program Timer function, at least the unit and amplifier must be connected via the
connectors.
Note
An 
remote control cable equipped with a 1/8 in. (3.5mm) diameter miniature two- conductor phone plug is included with this unit and with every compact disc player and
cassette deck that bears the 
mark.
REMOTE
CONTROL
Supplied
cable
Amplifier
cable
Stereo cassette deck
cable
CD player
Using Before
Connections
Operation
Information Other
9