Connecting ONKYO Components for z
Operation
If this unit is properly connected to another ONKYO component bearing the z symbol, you will be able to control it using the other component’s remote control.
Tuner
CD player
6 DISC
Main amplifier
Pre amplifier
For remote control operation
The upper and lower remote control jacks have the same function.
For remote control operation, connect this jack to any ONKYO amplifier, receiver or CD player that are equipped with a z remote control jack using the remote control cable.
Note:
Do not attempt to connect the z remote control jack to any equipment other than an ONKYO component that are equipped with a z remote control jack. Doing so could cause the unit to malfunction.
The function listed below can be accom- plished using the remote control of the master unit.
s a : Play
d: Rewind
f : Fast forward
e : Stop
t : Rec/Pause
CD synchro recording system
Once connections are made, as shown left, this function becomes enabled. It automati- cally starts recording on the cassette deck when the s button of the CD player is pressed. (See below.)
CD Synchro Recording System
Once the
2
s
1.Prepare for recording. (See pages 8 - 11.)
2.Start the CD player.
Recording will begin simultaneously.
Note:
Even if the CD player is stopped during recording, the cassette deck will continue recording. In this case, make sure to press the e button on the cassette deck.
14
