Setting the Voltage Selector (Worldwide Model Only)
Models without a voltage selector can only be used in areas where the power supply is the same as that of the cassette deck.
|
|
| 1. Determine the proper voltage for your |
|
|
| area: |
| VOLTAGE SELECTOR | 2. If the preset voltage does not conform | |
C A U T I O N | to your area, insert a screwdriver into | ||
120V |
| the groove in the switch. Slide the | |
|
|
| switch all the way to the right (120 V) |
| 120V | or to the left | |
| appropriate. | ||
|
|
| |
System Connections
•Do not plug in the AC power cord until all other connections have been made.
•On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the left channel. Refer to the amplifier’s instruction manual for further information on connections.
| C A U T I O N |
|
|
|
|
|
|
|
| • | - | • | - | • |
|
|
|
|
|
|
|
|
| TAPE |
| |
|
|
|
|
| (REC) |
|
| (PLAY) |
| OUT |
|
|
| L | R | L | R |
|
|
|
|
|
|
|
| |
IN | LINE |
|
|
|
|
|
|
|
(PLAY) |
|
|
|
|
|
|
| |
LINE |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
(REC) |
|
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
Connecting to an amplifier
Connect the tape deck LINE IN jacks to the TAPE REC jacks on the rear panel of the amplifier and the tape deck LINE OUT jacks to the amplifier TAPE PLAY jacks. Refer to the amplifier’s instruction manual for further information on connections.
Power Connections
1
To a wall outlet
2 POWER
Switching power on
1.Plug the AC power cord into a wall outlet.
2.Press the POWER button. The display will light.
ON 
OFF
5
