CAMCORDER CONNECTIONS
Your Model 62 VCR has jacks on its front panel that let you easily connect a camcorder or other video source. You can also connect a camcorder to the AUDIO IN and VIDEO IN jacks on the back panel of your Model 112/113 VCR.
You need a stereo A/V cable (not supplied) with plugs that fit the VCR’s jacks and the camcorder’s jacks for this connection.
AV 2
VIDEO IN | L – AUDIO IN – R |
POWER TV/VCR
(Model 62 shown)
PLAY
REWIND
RECORD/TIME
STOP
EJECT
1.Insert the plugs at one end of the cable into the AV 2 AUDIO and VIDEO IN jacks on the Model 62’s front panel.
2.Insert the plugs at the other end of the cable into the AUDIO/VIDEO OUT jacks on your cam- corder or other video source. Be sure to connect VIDEO to VIDEO and AUDIO to AUDIO (use the plug’s color codes as a guide).
CONNECTING POWER
To power the VCR, plug its power cord into a standard AC outlet.
Note: The VCR starts to search for a channel that has an Extended Data Service (EDS) signal (see “Turning On Auto Clock Set” on Page 17) when:
•You plug in the VCR for the first time.
•You unplug the VCR and reconnect it (within 24 hours) or after a power failure (of less than 24 hours).
•You reset the VCR’s memory (see “Resetting the VCR’s Memory” on Page 18).
13
