|
| ALLURE® QS3 SERIES |
|
| RANGE HOOD |
|
|
|
|
|
|
|
| Page 5 |
CONNECT WIRING |
| INSTALL HOOD |
WARNING: To reduce the risk of electric shock, make sure power is switched off at the service 
panel. Lock or tag service panel to prevent power
from being switched on accidentally.
HOUSE WIRING (120 VAC)
CARDBOARD (Use to protect cooktop)
1Connect House Wiring (120 VAC) to hood. Use a piece of 
Cardboard to protect the cooktop, if necessary.
GREEN
GROUND
SCREW
2Connect house black to hood black wire, house white to hood 
white wire, and house ground under Green Ground Screw.
Securely tighten cable clamp onto house wiring.
KEYHOLE (4) | MOUNTING SCREW (4) |
1 Hang hood from (4) Mounting Screws. Slide hood towards 
wall until mounting screws are engaged in narrow end of
(4)Keyholes. Tighten mounting screws securely. A long screwdriver works best.
2 | Replace bottom cover. |
DUCT
TAPE
3 Connect ductwork to hood. Use Duct Tape to make joints 
secure and air tight.
PAR20,
50W MAX.
HALOGEN
BULB (2)
- or - R16, 40W MAX.
INCANDESCENT
BULB (2)
4 Install (2) PAR20, 50 W Maximum Halogen Bulbs or (2) 
R16, 40 W Maximum Incandescent Bulbs. Purchase bulbs
separately.
!CAUTION: Bulbs may be hot! Refer to bulb packaging 
for further information.
5 Replace filters, turn on power at service panel, and test for 
proper operation.
