Connecting the power cable
Once all connections are complete, plug the power cable into the AC wall outlet.
AC OUTLETS
Power cable
■AC OUTLETS (SWITCHED)
Use these outlets to supply power to any connected components. Connect the power cable of your other components to these outlets. Power to these outlets is supplied when this unit is turned on. However, power to these outlets is cut off when this unit is set to the standby mode. For information on the maximum power or the total power consumption of the components that can be connected to these outlets, see “Specifications” on
page 70.
Connections
Turning on and off the power
■Turning on this unit
Press 1STANDBY/ON (or M POWER) to turn on this unit.
y
When you turn on this unit, there will be a 4 to
■Set this unit to the standby mode
Press 1STANDBY/ON (or N STANDBY) to set
this unit to the standby mode.
In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control.
PREPARATION
English
