FM/AM tuning
Selecting preset stations
You can tune into any desired station simply by selecting the preset station group and number under which it was stored.
y
When performing this operation with the remote control, press
CTUNER to select “TUNER” as the input source.
1Press 4A/B/C/D/E (or G A/B/C/D/E l / h) repeatedly to select the desired preset station group (A to E).
The preset station group letter appears in the front panel display and changes each time you press the button.
2Press 5PRESET/TUNING l / h (or
G PRESET/CH k / n) to select the desired preset station number (1 to 8).
The preset station group and number appear in the front panel display along with the station band and frequency.
E1:FM 87.5 MHz
y
You can select the desired preset station number (1 to 8) directly by pressing the numeric buttons on the remote control.
Exchanging preset station
You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”.
1Select preset station “E1” using 4A/B/C/D/E and 5PRESET/TUNING l / h.
See “Selecting preset stations” on this page.
2Press and hold 2PRESET/TUNING for more than 3 seconds.
“E1” and the MEMORY indicator flash in the front panel display.
Flashes
MEMORY
E1:FM 87.5 MHz
Flashes
3Select preset station “A5” using 4A/B/C/D/ E and 5PRESET/TUNING l / h.
“A5” and the MEMORY indicator flash in the front panel display.
See “Selecting preset stations” on this page.
Flashes
MEMORY
A5:FM 90.7 MHz
Flashes
4Press 2PRESET/TUNING again.
“EDIT
