Advanced setup
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
Notes
•Only 1STANDBY/ON and BSTRAIGHT are effective while you are using the advanced setup menu.
•No other operations can be made while you are using the advanced setup menu.
•The advanced setup menu is only available in the front panel display.
1Press 1STANDBY/ON on the front panel to set this unit to the standby mode.
2Press and hold 0TONE CONTROL and then press 1STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu appears in the front panel display.
3Press BSTRAIGHT repeatedly to change the selected parameter setting.
4Press 1STANDBY/ON to confirm your selection and set this unit to the standby mode.
y
The settings you made are reflected next time you turn on this unit.
■Speaker impedance SP IMP.
Use this feature to set the speaker impedance of this unit so that it matches that of your speakers.
Choices: 8Ω MIN, 6Ω MIN
•Select “8Ω MIN” to set the speaker impedance to 8 Ω .
•Select “6Ω MIN” to set the speaker impedance to 6 Ω .
SP IMP. | Speaker | Impedance level |
|
|
|
| Front (A or B) |
|
|
| The impedance of each |
|
| |
8Ω MIN | Center | speaker must be 8 Ω or |
|
| higher. |
| Surround | |
|
| |
|
|
|
| Front (A or B) |
|
|
| The impedance of each |
|
| |
6Ω MIN | Center | speaker must be 6 Ω or |
|
| higher. |
| Surround | |
|
| |
|
|
|
■Factory presets PRESET
Use this feature to reset all the parameters of this unit to the initial factory settings (see page 67).
Choices: CANCEL, RESET
•Select “CANCEL” not to reset any parameters of this unit.
•Select “RESET” to reset the parameters of this unit.
Notes
•This setting completely resets all the parameters of this unit including the “SET MENU” parameters. However, the advanced setup menu parameters will not be initialized.
•The initial factory settings are activated next time you turn on this unit.
