Yamaha RX-V561 owner manual 65 En, During AUTO SETUP, After AUTO SETUP, Notes

Troubleshooting

During AUTO SETUP

Error message	Cause	Remedy	See
			page
E-1:NO FRONT SP	Front L/R channel signals are not detected.	Check the front L/R speaker connections.	12
E-2:NO SUR.SP	A surround channel signal is not detected.	Check the surround speaker connections.	12
E-3:NOISY	Background noise is too loud.	Try running “AUTO SETUP” in a quiet	—
		environment.
		Turn off noisy electric equipment like air
		conditioners or move them away from the	—
		optimizer microphone.
E-4:NO MIC	The optimizer microphone was unplugged	Connect the supplied optimizer microphone
	during the “AUTO SETUP” procedure.	to OPTIMIZER MIC jack on the front	24
		panel.
E-5:USER CANCEL	The “AUTO SETUP” procedure was	Run “AUTO SETUP” again.	24
	cancelled due to user activity.
E-6:INTERNAL ERROR	An internal error occurred.	Run “AUTO SETUP” again.	24
After AUTO SETUP
Warning message	Cause	Remedy	See
			page
W-1:OUT OF PHASE	Speaker polarity is not correct. This	Check the speaker connections for proper
	message may appear depending on the	polarity (+ or –).	12
	speakers even when the speakers are
	connected correctly.
W-2:OVER 24m (80ft)	The distance between the nearest speaker	Bring the speaker closer to the listening	—
	and the furthest speaker is out of adjustable	position.
	range.
W-3:LEVEL ERROR	The difference of volume level among	If “SWFR:TOO LOUD” or “SWFR:TOO
	speakers is excessive. (No level correction	LOW” appears, adjust the output volume of	24
	is made.)	the subwoofer.
		Readjust the speaker installation so that all
		speakers are set in locations with similar	—
		conditions.
		Check the speaker connections.	12
		Use speakers of similar quality.	—

Notes

•If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “AUTO SETUP” again.

•If a warning message “W-1” appears, corrections are made, but they may not be optimal.

•If a warning message “W-2” or “W-3” appears, no corrections are made.

•If an error message “E-6” occurs repeatedly, please contact a qualified Yamaha service center.

INFORMATION ADDITIONAL

English

65 En