■Using the remote control
The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
| 1 | 2 | 3 | 4 |
30º | 30º |
| Approximately 6 m (20 ft) | |
YInfrared window
Outputs infrared control signals. Aim this window at the component you want to operate.
y
To set the remote control codes for other components, see page 59.
Notes
•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–places of high humidity, such as near a bath
–places of high temperature, such as near a heater or stove
–places of extremely low temperatures
–dusty places
Connections
PREPARATION
English
