
Precautions
1. Recording Copyright
Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.
2. AC Fuse
The fuse is located inside the chassis and is not
3. Care
From time to time you should wipe the front and rear panels and the cabinet with a soft cloth. For heavier dirt, dampen a soft cloth in a weak solution of mild detergent and water, wring it out dry, and wipe off the dirt. Following this, dry immediately with a clean cloth. Do not use rough material, thinners, alcohol or other chemical solvents or cloths since these could damage the finish or remove the panel lettering.
4.Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz) written on the rear panel.
Worldwide models are equipped with a voltage selector to conform to local power supplies. Be sure to set this switch to match the voltage of the power supply in your area before plugging in the unit.
Features
Amplifier Features
■Rated output power (6 ohms, 1 kHz, 0.6% THD): Front 22 W + 22 W, center 22 W, surround 22 W + 22 W
■
■Stabilized ground potential, which is the basis of audio signal amplitudes
■Dolby* Digital & Dolby Pro Logic II decoder and DTS** decoder
■Acoustic Control function
■Subwoofer
■Five sets of audio input connectors and three sets of audio output connectors
■
■
■Large
■Three digital input connectors
■
■Late Night function
FM/AM Tuner Features
■30 FM/AM random presets
■FM auto tuning
■FM indoor antenna supplied
■AM indoor antenna supplied
*Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the
**Manufactured under license from Digital Theater Systems, Inc. US Pat. No.5,451,942 and other worldwide patents issues and pending, “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. ©1996 Digital Theater Systems, Inc. All Rights reserved.
Memory Preservation
This unit does not require memory preservation batteries.
A
The POWER switch must be set to ON in order to charge the backups system. The memory preservation period after the unit has been turned off varies depending on climate and placement of the unit. On average, memory contents are protected over a period of a few weeks after the time the unit has been turned off. This period is shorter when the unit is exposed to a very humid climate.
4