Network

After modifying the network settings, you must confirm the changes by executing “Save”.

This section explains how to configure the AV receiver’s network settings manually.

If your router’s DHCP server is enabled, you don’t need to change any of these settings, as the AV receiver is set to use DHCP to configure itself automatically by default (i.e., DHCP is set to “Enable”). If, however, your router’s DHCP server is disabled (you’re for example using static IP), you’ll need to configure these settings yourself, in which case, a knowledge of Ethernet networking is essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used by routers, computers, the AV receiver, and other devices to automatically configure themselves on a network.

What’s DNS?

The DNS (Domain Name System) translates domain names into IP addresses. For example, when you enter a domain name such as www.onkyousa.com in your Web browser, before accessing the site, your browser uses DNS to translate this into an IP address, in this case 63.148.251.142.

MAC Address

This is the AV receiver’s MAC (Media Access Control) address. This address cannot be changed.

DHCP

`Enable

`Disable

This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings.

Note

If you select “Disable”, you must configure the “IP Address”, “Subnet Mask”, “Gateway”, and “DNS Server” settings yourself.

IP Address

`Class A:

10.0.0.0” to “10.255.255.255

`Class B:

172.16.0.0” to “172.31.255.255

`Class C:

192.168.0.0” to “192.168.255.255” Enter a static IP address provided by your ISP. Most routers use Class C IP addresses.

Subnet Mask

Enter the subnet mask address provided by your ISP (typically 255.255.255.0).

Gateway

Enter the gateway address provided by your ISP.

DNS Server

Enter the DNS server address provided by your ISP.

En

Proxy URL

To use a Web proxy, enter its URL here.

Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

Network Control

`Enable

`Disable

This setting enables or disables control over the network.

Note

When set to “Enable”, the NET indicator is dimly-lit and the power consumption slightly increases in standby mode.

Control Port

`49152” to “65535

This is the network port used for control over the network.

Note

When the “Network Control” setting is set to “Disable”, this setting is cannot be selected.

Firmware Update

See “Firmware Update” for the update procedure

(page 74).

Note

Perform the firmware update only when such an announcement is posted on the Onkyo web site. Visit the Onkyo web site for the latest information.

It takes maximum 60 minutes to complete the firmware update.

Version

Displays the current version of the firmware.

Receiver

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update the AV receiver’s firmware. Do not shutdown the power of the AV receiver while updating.

Universal Port

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update Onkyo dock’s firmware. Do not shutdown the power of the AV receiver while updating.

Note

This update shall not be performed when no dock is connected to the UNIVERSAL PORT jack.

54

Page 54
Image 54
Onkyo TX-NR579 instruction manual Network, Firmware Update, Dhcp

TX-NR579 specifications

The Onkyo TX-NR579 is a versatile and powerful AV receiver that caters to both home theater enthusiasts and casual listeners alike. This model distills advanced audio technologies while maintaining user-friendly features that enhance the overall entertainment experience.

One of the standout features of the TX-NR579 is its support for 7.2-channel output, allowing users to connect various speakers to create a rich, immersive surround sound setup. With a robust power output of 100 watts per channel, this receiver can drive a range of speakers with ease, ensuring clear and dynamic sound reproduction across a variety of media types.

The TX-NR579 incorporates advanced audio technologies such as Dolby TrueHD and DTS-HD Master Audio, ensuring that users experience studio-grade sound quality for their movies and music. In addition, the receiver supports a variety of audio formats, allowing for seamless playback of different media sources.

Another notable feature is the inclusion of 4K Ultra HD video pass-through with HDR support. This enables users to enjoy stunning picture quality and vibrant colors when paired with compatible devices. With multiple HDMI inputs, the TX-NR579 accommodates various sources such as Blu-ray players, gaming consoles, and streaming devices, making it a central hub for home entertainment.

The receiver is equipped with Onkyo's AccuEQ room acoustics calibration system, which analyzes the sound environment and optimizes audio playback for the specific room. This ensures that users get the best possible sound experience tailored to their listening space.

For connectivity, the TX-NR579 offers built-in Wi-Fi and Bluetooth capabilities, allowing for easy streaming from smartphones, tablets, and other devices. Users can take advantage of popular services like Spotify and Pandora directly through the receiver, adding a convenient way to access music.

With its intuitive user interface and remote control compatibility, the TX-NR579 is designed for easy navigation and operation. Whether setting up a movie night or enjoying a music session, this receiver stands as a versatile solution for elevating home entertainment.

In summary, the Onkyo TX-NR579 combines powerful audio performance with advanced features, making it an ideal choice for both serious audiophiles and those looking to enhance their home cinema experience. Its exceptional sound quality, 4K support, and user-friendly design position it as a reliable addition to any home theater setup.