Onkyo TX-NR579 Connecting the AV Receiver, Connecting Your Speakers, Screw-typespeaker terminals

Connecting the AV Receiver

Connecting Your Speakers

Connecting the Speaker Cables

The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals.

Surround		Surround		Center
	right		left

Surround back/	Surround back/	Front right	Front left
Front high	Front high
right	left

Tip

•You can specify whether surround back or front high speakers are connected in the “Speaker Configuration” menu (➔ page 43) or during Audyssey 2EQ® Room Correction and Speaker Setup (➔ page 29).

■Screw-type speaker terminals

Strip 12 to 15 mm of insulation from the ends of the	12 to 15 mm
speaker cables, and twist the bare wires tightly, as
shown.

■Push-type speaker terminals

Strip 10 to 12 mm of insulation from the ends of the speaker cables,	10 to 12 mm
and twist the bare wires tightly, as shown.

En

11