Onkyo TX-NR609 1, 2 3

42

En

This section explains how to record the selected input

source to a component with recording capability, and how

to record audio and video from different sources.

AV Recording

Audio sources can be recorded to a recorder (e.g., cassette

tape deck, CDR, MD recorder). Video sources can be

recorded to a video recorder (e.g., VCR, DVD recorder).

Using Headphones

1Connect a pair of stereo headphones with a

standard plug (1/4 inch or 6.3 mm) to the

PHONES jack.

Note

• Always turn down the volume before connecting your

headphones.

• While the headphones plug is inserted in the PHONES

jack, the speakers are turned off. (The Powered Zone 2

speakers are not turned off.)

• When you connect a pair of headphones, the listening mode

is set to Stereo, unless it’s already set to Stereo, Mono,

Direct, or Pure Audio (European, Australian and Asian

models).

• If you connect an iPod or iPhone to the USB port on this

device, no sound will be output from the headphones jack.

Recording

1Use the input selector buttons to select the source

that you want to record.

You can watch the source while recording. The AV

receiver’s MASTER VOLUME control has no effect

on recording.

2On your recorder, start recording.

3On the source component, start playback.

If you select another input source during recording,

that input source will be recorded.

Contents

Main AV Receiver TX-NR609 n Instruction Manual Contents E Important Safety Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: WARNING Precautions For U.S. models For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS CAUTION: TO PREVENT ELECTRIC SHOCK, Supplied Accessories Declaration of Conformity Contents Introduction Turning On & Basic Operations Connections Advanced Operations Features Amplifier Processing Connections Miscellaneous Page Front & Rear Panels Front Panel Display Rear Panel Remote Controller Controlling the AV Receiver Connecting the AV Receiver Connecting the Speaker Cables Connecting Your Speakers Speaker Configuration Attaching the Speaker Cable Labels Speaker Connection Precautions Using Dipole Speakers Using a Powered Subwoofer Bi-amping the Front Speakers Connecting AV components To prevent shutter damage, hold the optical plug straight when inserting and removing. AV Cables and Jacks About AV Connections HDMI cable Other cables Y P P Connecting Components with HDMI Connecting Your Components Page Connecting Onkyo Components 1 2 3 Connecting a Recording Component Connecting the Antennas Connecting the Power Cord 1 2 Turning On/Off the AV Receiver Turning On 1 Turning Off Playback Selecting the Language for the Onscreen Setup Menus Playing the Connected Component 4 1 2 1 2 3 4 Extended Mode (Music) control Extended Mode (Video) control 1 2 3 4 Listening to Internet Radio 1 3 1 2 3 4 5 1 3 Windows Media Player 11 Setup Windows Media Player 12 Setup Playing Music Files on a Server 1 2 3 4 5 1 2 3 4 5 Remote Playback 1 2 3 4 5 Using Remote Playback Using the Tuner 1 2 3 4 5 1 2 1 2 Presetting AM/FM Stations Using RDS (excluding North American and Taiwan models) 1 2 1 2 3 4 1 2 1 2 3 4 1 2 Using Basic Functions Measurement procedure Using the Automatic Speaker Setup 1 2 3 4 5 6 7 8 Error Messages Changing the Speaker Setup Manually Using a Powered Subwoofer Selecting Listening Modes Using the Listening Modes About Listening Modes Onkyo-Original DSP Listening Modes Listening Modes Page Page Page Using the Home Menu 1 2 Using the Sleep Timer 1 Setting the Display Brightness 1 Displaying Source Information 1 Changing the Input Display 2 Using the Music Optimizer 1 Muting the AV Receiver 1 AV Recording Using Headphones 1 Recording 2 3 Advanced Setup Explanatory Notes On-screen Setup Menus Common Procedures in Setup Menu 1 Input/Output Assign Component Video Input Digital Audio Input Speaker Settings Speaker Setup Speaker Configuration Speaker Distance Level Calibration Equalizer Settings THX Audio Setup 1 2 3 Audio Adjust Multiplex/Mono Dolby DTS Audyssey DSX Source Setup Page IntelliVolume A/V Sync Name Edit 1 2 1 2 3 Picture Adjust Audio Selector Charge Mode Volume Setup Listening Mode Preset 1 Miscellaneous 2 OSD Setup Remote ID 1 2 Auto Standby Network Firmware Update Remote Mode Setup Tone Control Settings Speaker Levels 1 2 1 2 Late Night Music Optimizer Re-EQ Zone 2 Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional Amplifier Making Zone 2 Connections Adjusting the Volume for Zone 2 1 2 3 1 2 1 1 2 iPod/iPhone Playback via Onkyo Dock UP-A1 Dock Using the Onkyo Dock RI Dock Controlling Your iPod/iPhone With the RI Control Without the RI Control : Available buttons Controlling Other Components Preprogrammed Remote Control Codes Looking up for Remote Control Code 1 2 1 Controlling Other Components 2 3 Resetting REMOTE MODE Buttons 1 2 Resetting the Remote Controller 1 2 : Available buttons Troubleshooting Power Audio Only the front speakers produce sound Only the center speaker produces sound The surround speakers produce no sound The center speaker produces no sound The front high and surround back speakers produce no sound Video Tuner Remote Controller Theres no sound Theres no video UP-A1 Dock for iPod/iPhone Recording Zone 2 Music Server and Internet Radio USB Device Playback Others 1 2 Network/USB Features Network Requirements Connecting to the Network Server Requirements USB Device Requirements Supported Audio File Formats About DLNA Firmware Update Before you start Update procedure Updating the Firmware via Network 1 7 Updating the Firmware via USB 1 2 3 7 Troubleshooting 8 9 10 11 13 12 Connection Tips and Video Signal Path Video Connection Formats Audio Connection Formats * 1 * About HDMI Supported Audio Formats About Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About -compatible components Operations that can be performed with connection 1 2 3 4 Specifications Amplifier Section Tuner Section Video Section General Video Resolution Chart * 2 9 4 0 0 6 3 7 *