3 When you’ve finished making the settings, press

ENTER.

MultEQ: Auto Setup

 

Speakers Type(Front)

Normal

Powered Zone2

Not Act

Subwoofer

Yes

If your front speakers are bi-amped, you must select Bi-Ampin the “Speakers Type(Front)” setting (45). For hookup information, see “Bi- amping the Front Speakers” (16).

If you change “Powered Zone2” setting, refer to “Setting the Powered Zone 2” for more details (70).

If you are using a subwoofer(s), select “Yes” in the “Subwoofer” (45). If not, select “No” and skip step 4.

4 If you use a powered subwoofer(s), adjust the sub- woofer volume level to 75dB.

Test tones are played through the subwoofer. Use the volume control on the subwoofer.

Note

If your subwoofer does not have a volume control, disre- gard the level displayed and press ENTER to proceed to the next step.

If you set the subwoofer’s volume control to its maximum and the displayed level is lower than 75 dB, leave the sub- woofer’s volume control at its maximum and press ENTER to proceed to the next step.

5 Press ENTER.

Audyssey MultEQ® Room Correction and Speaker Setup starts.

Test tones are played through each speaker as Audyssey MultEQ Room Correction and Speaker Setup runs. This process takes a few minutes. Please refrain from talking during measurements and do not stand between speakers and the microphone. Do not disconnect the speaker setup microphone during Audyssey MultEQ Room Correction and Speaker Setup, unless you want to cancel the setup.

6 Place the setup microphone at the next position, and then press ENTER.

Audyssey MultEQ performs more measurements. This takes a few minutes.

7 When prompted, repeat step 6.

8 Use q/wto select an option, and then press

ENTER.

MultEQ: Auto Setup

 

- - Review Speaker Configuration - -

 

Subwoofer

Yes

 

Front

40Hz

TV

Center

40Hz

 

Surround

100Hz

 

Front Wide

None

 

Front High

100Hz

 

Surr Back

120Hz

 

Surr Back Ch

2ch

 

Save

Cancel

The options are:

`Save:

Save the calculated settings and exit Audyssey MultEQ Room Correction and Speaker Setup.

`Cancel:

Cancel Audyssey MultEQ Room Correction and

Speaker Setup.

Note

You can view the calculated settings for the speaker con- figuration, speaker distances, and speaker levels by using e/r.

9 Disconnect the speaker setup microphone.

Note

When Audyssey MultEQ Room Correction and Speaker Setup is complete, the “Equalizer” will be set to “Audyssey” (47). The Audyssey indicator will light (9).

You can cancel Audyssey MultEQ Room Correction and Speaker Setup at any point in this procedure simply by discon- necting the setup microphone.

Do not connect or disconnect any speakers during Audyssey MultEQ Room Correction and Speaker Setup.

If the AV receiver is muted, it will be unmuted automatically when Audyssey MultEQ Room Correction and Speaker Setup starts.

Changes to the room after Audyssey MultEQ Room Correction and Speaker Setup requires you run Audyssey MultEQ Room Correction and Speaker Setup again, as room EQ characteristics may have changed.

En

30

Page 30
Image 30
Onkyo TX-NR708 instruction manual Enter

TX-NR708 specifications

The Onkyo TX-NR708 is a high-performance AV receiver that offers a superb blend of power, versatility, and advanced technology, making it a top choice for home theater enthusiasts. Designed to deliver an immersive audio and video experience, it supports a wide array of formats and features that cater to modern needs.

One of the standout features of the TX-NR708 is its 7.2 channel configuration, which allows for the creation of a powerful surround sound setup. With a rated output of 100 watts per channel, this receiver can drive even demanding speakers while ensuring clarity and detail across a wide range of frequencies. It also supports Dolby TrueHD and DTS-HD Master Audio, delivering lossless audio quality that can bring movies, music, and gaming to life.

In terms of video capabilities, the TX-NR708 is equipped with HDMI 1.4 inputs, which support 3D video and 4K upscaling. This ensures that users can enjoy their content at the highest quality available, making it a future-proof option as 4K content becomes more accessible. The receiver also includes advanced video processing technologies, such as Faroudja DCDi Cinema, enhancing video signals for better clarity and color accuracy.

The Onkyo TX-NR708 features Audyssey MultEQ room calibration technology, which measures the acoustic properties of the listening environment and automatically adjusts the receiver’s settings to provide optimal sound performance. This feature is particularly beneficial for those who may encounter acoustic challenges in their rooms, ensuring a consistent and balanced audio experience.

Connectivity is another area where the TX-NR708 excels. It includes multiple HDMI inputs, digital audio inputs, and analog connections, making it easy to integrate with various devices. Moreover, it supports various streaming services and internet radio through built-in networking features, allowing users to enjoy their favorite music directly from the receiver.

The Onkyo TX-NR708 also includes an intuitive on-screen display and a remote control that simplifies navigation and operation. With its combination of power, advanced technology, and versatile connectivity options, the Onkyo TX-NR708 stands out as an exceptional choice for anyone looking to enhance their home entertainment system. Whether for movies, gaming, or music, this receiver is designed to deliver a captivating and immersive experience.