Onkyo TX-SR8350, TX-SR503E Connecting a Cassette, CDR, MiniDisc, or DAT Recorder

Connecting Your Components—Continued

Connecting a Cassette, CDR, MiniDisc, or DAT Recorder

Step 1:
Choose a connection type ( a , b , or c ) that matches the recorder, and then make the connection.
	b	DIGITAL IN
Connect one		COAXIAL	IN	a
		OUT
or the other				L
	c	OPTICAL
		3
				R
		TAPE

COAXIAL

OUT

OPTICAL

OUT

LL

RR

IN OUT

REC PLAY

Cassette recorder, CDR, etc.

•With the basic connection, you can play and record with the recorder, and listen via speaker set B.

•To connect the recorder digitally for playback purposes, use connections and or a and .

Connection		TX-SR503/503E/8350	Signal flow	Cassette/CDR/MD/DAT recorder
		TAPE IN L/R	⇐	Analog audio L/R output
	a
			⇒
		TAPE OUT L/R		Analog audio L/R input
		DIGITAL IN COAXIAL	⇐	Digital coaxial output
	b
	c	DIGITAL IN OPTICAL 3	⇐	Digital optical output

Connecting the Power Cord of Another Component

The AV receiver has an AC outlet on its rear panel for connecting the power cord of another AV component. The other component’s power switch can then be left in the ON position so that it turns on or off when the AV receiver is set to On or Standby.

Caution:

• Make sure that the capacity of the component that you connect to the AC OUTLET does not exceed the stated capacity (e.g., 100 W).

Notes:

•Onkyo components with jacks should be con- nected directly to wall outlets, not the AV

receiver’s AC OUTLET.

• The socket type and capacity will depend on the country in which you purchased the AV receiver.

European and some	American model
Asian models

28