OPEN303W

User Guide

Field Definition

Please ask your network manager about the currently used security protocol, if 802.1x authentication is currently used, then you can check this item to enable 802.1x security protocol. The key value will be configured automatically, just click Apply to take effect.

Protocol - This panel enables you to select an authentication protocol.

WPA Encryption Setting

User Name - Type in the user name assigned to the certificate.

Password - This panel is available when EAP-TLS is not selected (either MSCHAP V2 over PEAP is selected with WEP or LEAP is selected for CCX). This panel enables you to enter a login name and password or request that the driver prompt for them when you connect to a network.

Passphrase - Enter the key that you are sharing with the network for the WLAN connection. Key Format - Select Hex if you are using hexadecimal numbers (0-9, or A-F).

Select ASCII if you are using ASCII characters.

Certificate - Please ask your network manager about the certificate, select the same certificate as the certification server.

Load

You may select already saved file from the Profile name list, and then press Load. The setting status will then be restored.

Save Current

You may save current setting to profile and add one new item in Profile name.

Delete

Delete the files in the Profile name.

Advanced

Click the Advanced Setting button to configure the following figure. Refer to the Advanced

Setting

Setting section on the next page to see more information about the Advanced Setting.

Information

Click the Information button to display the Driver Version, Utility Version and MAC Address

of the system.

 

Advanced Setting

User Interface

Power Consumption Setting

Field

Definition

 

 

 

 

Language

Select English or Traditional Chinese.

 

 

 

 

Field

Definition

 

 

 

 

Continuous When this mode is selected, the power supply will be normally provided even when there is Access Mode

(CAM)

no throughput.

Maximum When this mode is selected, this device will stay in power saving mode even when there is Power-Saving

Mode

high volume of throughput.

When this mode is selected, the power mode will switch between CAM and Maximum

Fast Power-

Power-Saving Mode depending on the volume of throughput. The device driver checks the total bytes (only data frame) every 4 seconds to decide the power mode. If the total bytes

Saving Mode

sent exceed 10k bytes, the device driver will choose “CAM”. If the total bytes are less than 10k bytes, however, the device driver will choose “Maximum Power-Saving Mode”.

10