OPEN303W

User Guide

Network Connection

Once the device driver is well installed, a network setting described in the following should be also established.

Windows 98SE/ME

ëíÉé=N Go to Start ￿ SettingsF ￿ ControlF Panel ￿ NetworkF .

ëíÉé=O Make sure all the required components are installed. If any components are missing, click the Add button to add them.

ëíÉé=P For making your computer visible on the network, enable the File and Print Sharing.

ëíÉé=Q Click the Identification tab. Make up a name that is unique from the other computers' names on the network. Type the name of your workgroup, which should be the same used by all of the other computers on the network.

ëíÉé=R Click the Access Control tab. Make sure that Share-level access control is selected. If connecting to a Netware server, share level can be set to User-level access control.

ëíÉé=S When finished, restart your computer to activate the new device.

Windows 2000/XP

ëíÉé=N

Go to Start ￿ Settings ￿ Control Panel ￿

Network and Dial-up

 

Connections ￿

Local Area Connection ￿

Properties.

(In Windows XP)

 

 

ëíÉé=N

Go to Start ￿

Control Panel ￿ Network and Internet Connections ￿

 

Network Connection ￿ Wireless Network Connection Enabled USB

 

Wireless Network Adaptor.

 

ëíÉé=O

Make sure that all the required components are installed.

ëíÉé=P

If any components are missing, click the Install… button to select the

 

Client/Service/Protocol required. After selecting the component you need, click

 

Add… to add it.

 

 

ëíÉé=Q For making your computer visible on the network, make sure you have installed File and Printer Sharing for Microsoft Networks.

NOTE:

When assigning IP Addresses to the computers on the network,

￿remember to have the IP address for each computer set on the same subnet mask. If your Broadband Router use DHCP technology, however, it won’t be necessary for you to assign Static IP Address for your computer

ëíÉé=R To configure a dynamic IP address (i.e. if your broadband Router has the DHCP technology), check the Obtain an IP Address Automatically option.

ëíÉé=S To configure a fixed IP address (if your broadband router is not DHCP supported, or when you need to assign a static IP address), check the Use the following IP address option. Then, enter an IP address into the empty field, for example, enter 192.168.1.1 in the IP address field, and 255.255.255.0 for the Subnet Mask.

7