Optima Company EL-1500 warranty Optima Components

Maintenance Guide

OPTIMA® Sensor Activated Flushometers

The Sloan OPTIMA automatic electronic Flushometer relies on an infrared sensor to detect a user and activate a flushing cycle. No physical contact with the Flushometer surface is necessary, assuring sanitary protection. OPTIMA Flushometers are ADA-compliant devices and are available in both Royal® and Regal® Flushometer models. These hardwire Flushometers require the use of 24 VAC Stepdown Transformers.

The Flushometer is triggered by means of a self-adaptive infrared sensor. A flashing red indicator light identifies the presence of a target. After a detected user moves out of the effective range of the sensor, a signal is sent to the Flushometer Solenoid and, after appropriate arming and/or flush delays, the flush cycle is initiated. When a unit is used intermittently, the Sentinel Flush feature ensures a cleansing cycle at least once in any 24-hour period.

NOTE: Sensor location and positioning is critical. Failure to properly position the electrical box to the recommended plumbing rough-in dimensions will result in improper installation and may impair product performance. All tradesmen (plumbers, electricians, tile setters, etc.) involved in the installation of this product must coordinate their work efforts to ensure proper product installation. Improper installation may nullify the manufacturer’s warranty.

OPTIMA® Components:

EL-1500 Series Sensor

•Self-adaptive Sensor

•Flashing Red Light Indicator

•Replaceable Sensor Window

•Two-wire connection system

•Surface Mounted (optional)

Solenoid

•Non-Hold-Open integral Solenoid operator

Transformer

24 VAC Stepdown Transformer

•EL-154 for 120 VAC Electrical Supply (50/60 Hz)

•EL-342 for 220/240 VAC Electrical Supply (50/60 Hz)

Override Button

•Courtesy Flush

(available only on Water Closet installations)

(also available on Concealed Water Closet ES-SM)

Cover Plates

•Override Button Sensor Cover Plate

(Exposed and Concealed Water Closet installations)

•Solenoid Cover Plate

(Exposed Water Closet and Urinal installations)

•Urinal Sensor Cover Plate (Concealed Urinal installations)

Wall Box Option

•Stainless Steel or Polished Brass Surface Finish

•Concealed installation

•Vandal Resistant

LIMITED WARRANTY

Sloan Valve Company warrants its Flushometer Products to be made of first class materials, free from defects of material or workmanship under normal use and to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three years (one year for special finishes) from date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost, and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.

The information contained in this document is subject to change without notice. Royal/Regal Optima ES-S M.G.– Rev. 0b (05/07) Code No. 0816510