.
2
Two -Spea ker System
Four-Speaker System
If your auto sound system has a front-to-
rear fader, connect your speakers as fol-
lows.
MOUNTING THE
SPEAKERS
1. Select a flat area (such as your car's
rear deck) for the mountin
g
surface.
The surface should be sturdy
enou
g
h to support the wei
g
ht of the
speakers.
2. Usin
g
the supplied template, cut two
speaker holes.
3. Drill three 5/32-inch holes for each
speaker's mountin
g
screws, and
another for each speaker’s wire.
4. Route the speaker wire from your
auto sound system, throu
g
h the
mountin
g
surface to the speaker
location, and connect it to the
speaker (see “Wirin
g
the Speakers”).
Caution: Avoid areas where the
wires wi ll be pinched or stepped on.
5. Cover each drilled hole with one of
the supplied nut plates.
6. Remove the cover from each
speaker to expose the mountin
g
holes.
7. Insert each speaker into its m ountin
g
location, then ali
g
n each speaker’s
mountin
g
holes wi th the dri lled holes.
8. Thread one of the supplied screws
throu
g
h each hole and ti
g
hten it .
9. Firmly press the cover onto each
speaker.
12-1734.fm Page 2 Monday, July 12, 1999 9:48 AM