Trunk Mount Amplifier
(120-1971B) Preparation Faxback Doc. # 18181
Before you install the amplifier, carefully read all instructions.
Please note the following before you begin installing the amplifier:
For added safety and to protect your autosound system and amplifier,
disconnect your vehicle battery's negative (-) cable before you begin
making the connections.
Do not mount the amplifier until you are sure the connections are
correct. To help you determine this, temporarily connect the amplifier
and test it to be sure it works before you permanently mount the
amplifier.
CHOOSING A MOUNTING LOCATION
Choose a mounting location that meets the following requirements:
Does not interfere with the vehicle's operation.
Lets you drill mounting holes without damaging other vehicle
components.
Allows enough space around the cooling fins to permit reasonable
airflow and cooling.
WARNING: Do not touch the amplifier when it is on. The amplifier gets
very hot while in use.
INCLUDED WITH THE AMPLIFIER
Your amplifier comes with the following items that are necessary for
mounting. (See "Mounting the Amplifier," Faxback Doc. # ). Be sure
to unpack these items before you dispose of the packing materials.
4 Sheet-Metal Screws
4 Spring Washers
4 Flat Washers
CONNECTING POWER