3.Install the batteries as indicated by the polarity symbols (+ and
+ | + |
+ | + |
4.Replace the battery compartment cover.
If the ON/OFF indicator dims, replace the batteries.
Warning: Dispose of old batteries promptly and properly. Do not burn or bury them.
Cautions:
•Always remove old or weak batter- ies. Batteries can leak chemicals that can destroy electronic parts.
•If you do not plan to use the karaoke system with batteries for several days, or if you plan to use only AC power, remove the batteries.
Using AC Power
You can power your karaoke using a 6V AC adapter and a size M Adaptaplug® adapter (neither supplied). Both are available at your local RadioShack store.
Cautions:
You must use a Class 2
!power source that supplies
6V DC and delivers at least
50 mA. Its center tip must be set to positive and its plug must fit the
6
karaoke’s DC 6V jack. Using an adapter that does not meet these specifications could damage the karaoke or the adapter.
•Always connect the AC adapter to the karaoke before you connect it to AC power. When you finish, discon- nect the adapter from AC power be- fore you disconnect it from the karaoke.
Note: Connecting an AC adapter dis- connects internal batteries.
1.Rotate ECHO counterclockwise to- ward POWER until it clicks to turn it off.
POWER
ECHO
2.Insert the size M Adaptaplug adapter into the AC adapter’s cord so it reads TIP+ (positive).
3.Insert the adapter’s barrel plug into the karaoke’s DC 6V jack.
|
|
| R IN L | OUT |
. | B |
| CD | L |
|
|
|
| |
DC 6V | • | TAPE | R | |
MAX. 50mA |
DC 6V Jack
4.Plug the AC adapter into a standard AC outlet.