Note: Press and hold down SKIP/TUNING ⁄ or Ÿ (or SKIP/
TUNING Down or Up on the remote control) to rapidly advance the minutes.
5.Press ENTER or wait 10 sec- onds. The minute digits stop flashing and the time is set.
Note: In the event of a power failure, the display will flash and the clock must be reset.
BASIC OPERATION
1.Press TUNER/BAND, TAPE, or CD PLAY/PAUSE to select the desired audio source.
2.If you select TUNER/BAND, select the desired station (see “Using the Tuner” on Page 14).
If you select CD PLAY/PAUSE or TAPE, start the selected audio source (see “Using the CD Changer” on Page 16 or “Using the Cassette Deck” on Page 22).
12
3.Adjust VOLUME to a comfortable listening level.
4.Adjust BALANCE until you can hear the sound equally from the left and right speakers.
5.Press
6.To turn off the system, press POWER. The STAND BY indica- tor lights.