4.To select a memory position, within about 5 seconds, repeat- edly press REPEAT/SCAN until the desired preset station number appears (or press the desired pre- set station number (1 to +10) on the remote control), then press PROGAM/MEMORY to store your selection in memory.
illustration
Note: If MEMORY and the preset station number disappear before you press PROGAM/MEMORY, begin again from Step 3.
5.Repeat Steps
Note: You cannot clear a station from memory, but you can store a new one in its place.
Caution: The
16
Recalling a Stored Station
1.Press BAND to select AM or FM.
2.Repeatedly press REPEAT/SCAN until the desired preset station number appears (or press the desired preset station number (1 to +10) on the remote control).