17
OPERATION

PLAYING A CD

1. Set VOLUME to the minimum
level and move HOLD to the off
position.
2. Press OPEN and lift the disc
compartment cover.
3. Carefully place the CD, label
side up, over the disc compart-
ment’s center hub. Press down
slightly on the CD until it clicks
and lies flat in the compartment.
Then close the disc compart-
ment cover.
The display briefly shows a
flashing
– –, then the total num-
ber of tracks and the CD’s total
playing time. After about 10 sec-
onds, the CD player displays 00
briefly, then turns off.
4. Press . The display briefly
shows a flashing – –, then the
first track begins to play. The
display shows the current track
number and elapsed time.
5. Adjust the volume to a comfort-
able listening level.
• If you connected earphones,
amplified speakers, or the
CD-to-cassette adapter to
the CD player’s PHONES
jack, set VOLUME on the CD
player to the desired level.
• If you connected the CD
player’s LINE OUT jack to
amplified speakers, your
home audio system, or your
auto sound system, use the
volume controls on those
units to set the desired vol-
ume as needed.
42-5069.fm Page 17 Thursday, August 12, 1999 10:28 AM