10
OPERATION

LISTENING TO THE

RADIO

1. Repeatedly press TUNER ON/BAND
until the desired band (AM, FM1,
FM2, or FM3) appears.
2. Rotate VOL to a comfortable listen-
ing level.
3. Use one of these methods to tune
to the desired station. The display
shows the tuned frequency.
Manual Tuning: Repeatedly press
TUNING + or – to tune up or down
the selected band. To tune the band
more quickly, hold down TUNING +
or –.
Automatic Tuning: Hold down
TUNING + or – for about two sec-
onds, then quickly release it. The
CD player tunes up or down the
selected band, stopping at the next
station with a strong signal.
Memory Tuning: Press one of the
five memory buttons (P1 through
P5) to directly select a preset sta-
tion. You can set up to 20 presets
(see “Storing a Radio Station in
Memory” on Page 11).
Notes:
• The CD player has a built-in AM
antenna. For the best AM recep-
tion, rotate the CD player.
• The supplied Y-cable or an
optional earphones’ or head-
phones’ cord serves as an FM
antenna. For the best FM recep-
tion, fully uncoil the cord.
• When listening to an FM station
broadcasting in stereo, press
STEREO/MONO. ST appears. If
reception is poor or noisy, press
STEREO/MONO again. MONO
appears. The sound is not in ste-
reo, but reception should
improve.
4. Press
TUNER OFF to turn off the
radio.
VOL
42-5098.fm Page 10 Wednesday, January 19, 2000 4:03 PM