1
5
Special Features
Programming a Sequence While a CD is Playing
While the CD changer is playing, you can program a sequence of tracks, but not
an entire CD. Press PGM during play, then select the CD and track using the
remote control’s number buttons and DISC SET/TRACK SET, and press PGM.
When the current track finishes playing or you press , programmed play starts
.
Or, you can store the track currently being played directly into memory. While
the track is playing, press PGM once to enter the program mode , then press
PGM again to store the current track. You might find this feature convenient to
use along with hi-lite scan.
Erasing a Programmed Selection
In the program mode (when PGM appears on the display), press CLEAR to erase
the last-stored selection (track or CD). The new last-stored selection appears on
the display until you press / (or on the remote control).
Note: You cannot erase a selection that is currently playing or that has already
played.
Clearing a Programmed Sequence
Turning off the CD changer does not clear the programmed sequence. To clear
the sequence, do any of the following:
• Press when the CD is stopped.
• Start best selection play.
• Select ALL, SINGLE , CUSTOM, previous scan, or play the CD in the sin
-
gle play slot while programming a sequence.
•Press
RANDOM while programming a sequence.
Storing a Pause within a Programmed Sequence for Recording to Cassette
When you record a programmed sequence onto a cas sette tape, you can pro-
gram a pause to occur after the last selection you plan to record on t he first side
of the tape (so you can turn the tape over).
To store a pause, press on the remote in Step 3 of “Programming a
Sequence” on Page 14. PA appears on the display.
During play, when the CD changer pauses and displays /, turn over the tape
and press to resume recording.
Notes:
• You cannot program a pause as the first or last selection.
• You cannot program two pauses in a row.