4

To have the buzzer sound at the set

alarm time

, set ON/OFF/AUTO/ALARM
to
ALARM. ALARM lights.
At the preset alarm time, the buzze r
sounds.
To stop the buzzer immediately, set
ON/OFF/AUTO/ALARM to OFF.
To stop the buzzer and turn on the ra-
dio, set ON/OFF/AUTO/ALARM to
AUTO to play the radio for about 2
hours or to ON to leave the radio on.

Follow these steps to have the buzzer

and cassette player turn on at the set

alarm time.

1. Load a cassette tape (see “Load-
ing a Cassette Tape” on Page5).
2. Set ON/OFF/AUTO/ALARM to
ALARM. ALARM lights.
3. Press PLAY.
At the preset alarm time, the buzze r
sounds and the cassette plays.
To stop the cassette and buzzer im-
mediately, set ON/OFF/AUTO/
ALARM
to
OFF and press STOP.
To stop the buzzer but have the cas-
sette continue playing, set ON/OFF/
AUTO/ALARM to AUTO. The cassette
plays until it reaches the end of the
side, then it automatically stops. After
the cassette stops, the radio turns on
and plays for the rest of the alarm peri-
od.

Follow these steps to have only the

cassette player turn on at the set alarm

time.

1. Load a cassette tape (see “Load-
ing a Cassette Tape” on Page 5).
2. Set ON/OFF/AUTO/ALARM to
AUTO. ALARM lights.
3. Press PLAY.
At the preset alarm time, the cassett e
plays until it reaches the end of the
side, then it automatically stops. After
the cassette stops, the radio turns on
and plays for the rest of the alarm peri-
od.
Using Snooze
To temporarily silence the alarm (buzz-
er, radio, cassette, or buzzer/cassette),
press SNOOZE. This silences the
alarm for about 9 minutes.
You can repeat this cycle as many
times as you like. To turn off the alarm
so it does not sound again, set ON/
OFF/AUTO/ALARM to OFF.
12-1629.fm Page 4 Friday, August 6, 1999 10:01 AM