Optimus CTR-108 owner manual Operation, Loading A Cassette Tape, Playing A Cassette Tape

14-1115.fm Page 7 Friday, January 8, 1999 10:31 AM

OPERATION

LOADING A CASSETTE TAPE

1.Take up any slack in the tape by turning one of the cassette’s hubs with a pencil.

PLAYING A CASSETTE TAPE

1.Load the cassette tape.

2.Press PLAY. The cassette plays until it reaches the end of the side, then it automatically stops.

MIC

RECORD

PLAY REWIND FAST-F

STOP EJECT

PAUSE

Caution: If you do not remove the excess slack, the tape could become tangled in the record/ playback mechanism.

2.Press STOP/EJECT to open the cassette compartment door.

MIC

RECORD			STOP	PAUSE
PLAY	REWIND	FAST-F	EJECT

3.Load the cassette in the slot in the door with its open edge out, the side you want to play facing up, and its full reel to the left.

4. Close the door.

Notes:

•Press PAUSE to temporarily stop playback. Press PAUSE again to resume playback.

•To rapidly wind the tape forward or backward, press STOP/ EJECT, then FAST-F or REWIND. Press PLAY to resume play- back.

3.Adjust VOLUME as desired.

4.Press STOP/EJECT to completely stop playback before it automati- cally stops. Press STOP/EJECT again to open the cassette com- partment and remove the cassette tape.

7