9
Cautions:
You must use a power source that
supplies 3V DC and delivers at
least 300 mA. Its center tip must
be set to negative and its plug must fi t the
Micro-39's DC 3V jack. Using an adapter
that does not meet these specifications
could damage the Micro-39 or the adapter.
• Always connect the DC adapter to the Mi-
cro-39 before you connect it to the power
source. When you finish, disconnect the
adapter from the power source before you
disconnect it from the Micro-39.
Follow these steps to power the Micro-39 fr om
your vehicle's battery.
1. Set the DC adapter's voltage switch to 3V.
2. Insert the AC adapter’s Adaptaplug into the
adapter's cord so it reads TIP–.
!
14-1167.fm Page 9 Thursday, January 20, 2000 2:02 PM