Amplifier Setup (Continued)
Sound Mode
You can enjoy surround sound simply by selecting one of the
Each time you press the SOUND EFFECT button, the sound mode is changed in the following order:
PROLOGIC → HALL 1 → HALL 2 → THEATER
ote
For DVDs, you can only select sound modes when the PCM indicator is shown on the front panel display.
Each time you press thebutton, the Pro Logic II sound mode is changed in the following order:
PROLOGIC → MOVIE → MUSIC → VIRTUAL → MATRIX
Tip
You can quickly select SURROUND OFF (2CH STEREO) mode by pressing the BY PASS button.
When DVD is inserted:
You can change the sound mode of a DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback.
Although DVD contents differ from disc to disc, the following explains the basic operation when this feature is used.
Each time you press the AUDIO button, the sound mode of DVD is changed in the following order:
→ → and
When a DVD is inserted and the PROLOGIC II indicator lights:
Each time you press thebutton, the Pro Logic II sound mode is changed in the following order:
PROLOGIC → MOVIE → MUSIC → VIRTUAL → MATRIX
Tip
You can set PRO LOGIC II mode to Off (2CH STEREO) by pressing the BY PASS button (the PROLOGIC II indicator dis- appears).
For your reference:
•The DVD+VCR memorizes the last mode settings for each source individually.
•The encoding format of discs is usually printed on the packaging.
-Dolby Digital discs are labeled with the logo.
-Dolby Surround encoded programs are labeled with
the logo.
-DTS Digital Surround discs are marked with DTS.
ote
When you play sound tracks with a 96kHz sampling frequency, the output signals will be converted to 48kHz.
Sound Level
You can set the sound level for each channel independently.
1 Press LEVEL.
The level indicator appears on the front panel display.
2 Press b/B to select the desired speaker. Press the b/B buttons to select each speaker in the fol- lowing order:
FL (Front Left) → C (Center) → FR (Front Right) → SR (Surround Right) → SL (Surround Left) → SW (Subwoofer) → FL (Front Left)
•In
3 Press v/V to adjust the sound level of the selected channel
4 Repeat steps
5 When settings are complete, press LEVEL.
Test Tone
This function allows you to adjust the sound balance of the speakers relative to the listening position.
1 | Select test tone mode by pressing the TEST |
TONE button. |
•A hissing noise is output for 2 seconds from each speaker in the following order:
FL (Front Left) → C (Center) → FR (Front Right) → SR (Surround Right) → SL (Surround Left) → SW (Subwoofer) → FL (Front Left)
2 Press LEVEL then press the v/V buttons to adjust sound levels for each speaker.
•The sound levels should be balanced while seated in the primary listening position.
•If you adjust sound levels during test tone mode, the test tone will be paused in the active speaker channel.
3 When setting is complete, press TEST TONE.
SYSTEM SETUP
17