VCR Setup (Continued)
The VCR Setup Menu
1
2 Press v/V to display the VCR SETUP menu, then press SELECT/ENTER.
The VCR SETUP menu will appear.
SET CLOCK |
|
| |
TIMER RECORD | SCREEN DISPLAY: | ON | |
LANGUAGE: |
| ||
|
|
| |
CHANNEL SETUP | AUDIO MODE: |
| |
BROADCAST TYPE: |
| ||
|
|
| |
VCR SETUP | AUDIO OUTPUT: |
| |
SELECT | ENTER | SELECT | ADJUST |
TO EXIT PRESS |
| TO EXIT PRESS |
|
3 Press v/V to choose the desired option on the VCR SETUP menu. Then press b/B to choose the desired setting.
SCREEN DISPLAY
The DVD+VCR
LANGUAGE
The DVD+VCR
Press b/B to switch LANGUAGE among ENGLISH, SPAN- ISH and FRENCH.
AUDIO MODE
The DVD+VCR has two separate audio playback systems: 1)
Press b/B to switch AUDIO MODE between
NORMAL .
BROADCAST TYPE (STEREO/SAP/MONO)
Press b/B to switch BROADCAST TYPE among STEREO, SAP, and MONO.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE
This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.
Press b/B to switch AUDIO OUTPUT among STEREO, LEFT, and RIGHT.
Channel Selection
The DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels
Before you begin:
Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown on page 11.
AUTO CHANNEL PROGRAMMING
1 Press MENU to display the MAIN menu.
2 Press v/V to select the CHANNEL SETUP menu, then press SELECT/ENTER.
The CHANNEL SETUP menu will appear.
SET CLOCK |
| ||
TIMER RECORD | AUTO CHANNEL SEARCH | ||
CHANNEL SOURCE: | |||
|
| ||
CHANNEL SETUP | ADD/DEL CH: | ||
INPUT SELECT: | |||
|
| ||
VCR SETUP |
| ||
SELECT | ENTER |
| |
TO EXIT PRESS |
|
| |
Press V to choose the INPUT SELECT option, | |||
3 then press b/B to select TUNER. |
Press b/B repeatedly to switch among TUNER, LINE1 and LINE2.
4 Press v/V to choose the AUTO CHANNEL SEARCH option, then press b/B to find channels.
The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.
5 After AUTO CHANNEL SEARCH is complete, make sure the CHANNEL SOURCE is set appro- priately in the CHANNEL SETUP menu. Press v/V to choose CHANNEL SOURCE, then press b/B to select TV or CATV.
Remember, TV is for the
6 Press MENU to return to the TV screen.
7 Use CH/TRK (v/V) or CHANNEL (v/V) on the front panel to cycle the DVD+VCR through the channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from memory manually.
1Press V to choose the ADD/DEL CH option on the CHANNEL SETUP menu. Press b/B to select a channel to add or erase.
2Press SELECT/ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.
3Press MENU to return to the TV screen.
20