Dolby Laboratories HT2030 Tape Counter Memory Feature, Additional VCR Information, Tape Remaining

Begin recording or playing a tape.

Press CLK/CTR repeatedly to display the real- time counter on the TV screen.

At the point that you want to locate later, reset the real-time counter to “M 0:00:00” by pressing

CLEAR.

Continue to play or record.

Press STOP (x) when recording or playback fin- ishes.

VCR Operation (Continued)

Tape Counter Memory Feature

Real-Time Counter

Press CLK/CTR to select the real-time counter display, which shows the length of the tape in hours, minutes, and seconds.

Every press of CLK/CTR changes the TV screen as illustrated below.

2:15 AM	M 0:05:25	REM 1:07
CLOCK	COUNTER	REMAINING TIME

The counter changes to “M 0:00:00” when the cassette is ejected.

The real-time counter does not operate if nothing is record- ed on the tape.

The real-time counter will not work unless a tape is inserted.

Counter Memory Function

This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1

2

3

4

5

6 Press REW (m).

The tape automatically stops when the tape counter returns to about “M 0:00:00”.

Tape Remaining

This function displays the time remaining on the tape during recording or playback.

Press CLK/CTR until the REM indicator displays on the TV screen during recording or playback.

ote

The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, T-210, etc.).

Additional VCR Information

During manual recording, Timer recording, One-Touch Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD+VCR will turn itself off.

After you have finished using the DVD+VCR, rewind, eject, and remove the cassette. Place the cassette in its protec- tive sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it.

Be sure the DVD+VCR Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television on the DVD+VCR channel (3 or 4) and pressing the TV/VCR selector to turn the DVD+VCR’s VCR indicator on.

Do not attempt to hook up more than one television set to the DVD+VCR for either recording or playback.

Auto Play System

The DVD+VCR features automatic playback when you load a cassette with the record safety tab removed (such as with most pre-recorded or rented movies).

The power turns on automatically and playback begins. At the end of the tape, the DVD+VCR stops, then rewinds.

The cassette is ejected after rewinding and the unit turns itself off automatically.

LOAD		AUTO
AUTO￿	AUTO￿	AUTO￿
		POWER￿
PLAY	REWIND
		OFF
TAPE
		EJECT

30