Rear Panel
VCR IN LINE 1 (AUDIO/VIDEO)
Connect to the audio/video output of an external source (audio system, TV/monitor, another VCR, etc.).
RF OUT (DVD/VCR OUT) Connect to a TV with an RF coaxial input.
ANT.IN Connect the VHF/UHF/CATV antenna to this terminal.
AC Power Cord
Plug into a standard wall outlet.
DVD/VCR OUT (AUDIO/VIDEO (Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT VIDEO OUT/PROGRESSIVE SCAN (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs. FOR DVD VIEWING ONLY.
DIGITAL AUDIO IN (OPTICAL) Connect to the digital audio output of an external digital device (see “Dust Protection Cap” below).
VIDEO OUTPUT Switch Select either
Dust Protection Cap
Remove the dust protection cap from the DIGITAL AUDIO IN jack and connect the optical digital cable (not supplied) securely so that the configurations of both the cable and the connector match. Keep the dust protection cap and always reattach the cap when not using the connector to protect against dust intrusion.
FM Antenna Connectors
Connect the FM antenna to this terminal.
AM Antenna Connectors
Connect the AM antenna to this terminal.
SPEAKER Connectors Connect the six supplied speakers to these terminals.
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
10
