Dolby Laboratories HT2030 VCR Operation, Checking Erasing the Timer Program, Program Priority

VCR Operation (Continued)

10	Use V to choose the SPEED option.
	Use b/B to choose the desired recording
	speed (AUTO, SP or EP).
	AUTO mode determines how much tape is left and
	switches the recording speed from SP to EP, if nec-
	essary, to complete recording the program. There
	will be some picture and sound distortion at the point
	of the speed change.

11	Use V to choose the REPEAT option.
	Use b/B to choose the desired repeat setting
	(ONCE, WEEKLY, or DAILY).
	ONCE: For recording a single event.
	WEEKLY: For recording an event once a week on a
	certain day.
	DAILY: For recording an event at the same time
	Monday through Friday.
			PROGRAM 1
			MONTH	:	JULY
			DAY	:	6 SAT
			START	:	6 : 00 PM
			STOP	:	7 : 30 PM
			CHANNEL :		4 TV
			SPEED	:	SP
			REPEAT	:	ONCE
			SELECT		ADJUST
Tip		TO EXIT PRESS

If the input data is wrong, use v to select the data and correct it using b/B.

12	Press MENU to store the program in memory.
	If the program start time is past, the EVENT
	SCHEDULED IN THE PAST message will appear on
	the TV screen. Return to the incorrect program and
	program it with the correct time.
	If you enter a past date, the timer recording will be
	performed on that date the following year.
	Additional programs may be entered by repeating
	steps 1-12.
	Cable Users: If your cable hookup is via a TV convert-
	er box, you can program multiple recordings only on
	the converter box output channel. This is because the
	converter determines what channel you view through
13	your DVD+VCR.
	Turn the DVD+VCR off for timer recording to
	take place.

Tip

If you are finished programming and you want to set the DVD+VCR to record the programs you have entered:

A)MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD+VCR. B) YOU MUST TURN OFF THE DVD+VCR BEFORE IT WILL RECORD ANY TIMER PROGRAMS. (the TIMER indicator will light). The DVD+VCR is now set to record the preset programs.

ote

If the power fails or the DVD+VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer must be reset when power is restored. Reset the clock according to the instructions on page 21.

Checking (Erasing) the Timer Program

Programming can be checked whenever the DVD+VCR is turned on.

1Press MENU to display the MAIN menu.

2Use v/V to choose the TIMER RECORD menu. Press SELECT/ENTER and the TIMER RECORD menu will appear.

		SET CLOCK			PROGRAM 1
					MONTH	:	JULY
		TIMER RECORD			DAY	:	6 SAT
					START	:	6 : 00 PM
		CHANNEL SETUP			STOP	:	7 : 30 PM
					CHANNEL :		4 TV
		VCR SETUP			SPEED	:	SP
					REPEAT	:	ONCE
	SELECT		ENTER	TO ERASE		PRESS
TO EXIT PRESS				TO EXIT PRESS

3Use b/B to select a program you want to check or erase. If you want to erase the program, press

CLEAR.

4Press MENU to return to the TV screen.

Program Priority

If the recording start and end times of preset programs overlap on the same day

(see the example and dia-

gram left), program number 2

will not be recorded until pro- gram number 1 is finished.

The first part of program number 2 will not be recorded. The same thing will happen to program number 3.

OPERATION

27