English 13
Specifications
Models HF3451/HF3461/
HF3462
Rated voltage | 230V |
|
Rated frequency | 50Hz |
|
Rated input | 75W (HF3451) or 100W |
|
| (HF3462/HF3461) |
|
Class | II |
|
Classification | Not classified |
|
Ingress of water | IPX0 |
|
Operating conditions | Temperature | from +10°C to +35°C |
| Relative humidity | from 30% to 90% |
Storage conditions | Temperature | from |
| Relative humidity | from 30% to 90% (no |
|
| condensation) |
Circuit diagrams, parts lists and other technical descriptions will be provided on request. Take measures to prevent the occurrence of electromagnetic interference or other types of interference between this appliance and other appliances.
Frequently asked questions
Question | Answer |
|
|
Why does the appliance | Perhaps you have not inserted the plug properly into the wall socket. |
not work? | Put the plug properly into the wall socket. |
| Perhaps there is a power failure. Check if the power supply works by |
| connecting another appliance. |
| Perhaps the mains cord is damaged. If the mains cord is damaged, you |
| must have it replaced by Philips, a service centre authorised by Philips |
| or similarly qualified persons in order to avoid a hazard. |
| Perhaps the appliance overheated and the overheating protection |
| switched off the appliance. Remove the cause of overheating (e.g. a |
| towel that blocks one or more vents) and unplug the appliance. Wait |
| approx. 20 minutes and then put the plug back into the wall socket. |
Why does the appliance | This is normal, as the appliance is heated up by the light of the lamp. |
become hot during use? |
|
The appliance does not respond when I try to set different functions. What should I do?
Why does the light not go on when the alarm goes off?
Press the Reset button in the bottom of the appliance or remove the plug from the wall socket and reinsert it.The appliance is then reset to the factory default settings.
Perhaps you set the light level too low.